Incubator XLmulti S DARK LS for Zeiss Axio Observer

Incubator XLmulti S DARK LS

The large light-tight and laser-safe incu­ba­tor with hinged doors is made for a con­trolled warm air incu­ba­tion and enclos­es the micros­cope, the nose­piece, the objec­tives and fur­ther com­po­nents. Con­struct­ed from black acrylic glass it is designed for the invert­ed micros­cope Axio Observ­er by Zeiss.

Description:

  • Large incu­ba­tor for the Axio Observ­er by Zeiss
  • Homo­ge­neous heat dis­tri­b­u­tion for best con­di­tions for high res­o­lu­tion live cell imag­ing applications
  • Par­tic­u­lar­ly suit­ed for the broad field of flu­o­res­cence applications
  • Two large hinged doors in the front panel on the left and right hand side
  • One slid­ing door at the front has a trans­par­ent, non-reflecting acrylic win­dow under­neath for visu­al con­trol dur­ing operation
  • Open­ing with two slid­ing doors on the right hand side below the micros­cope stage
  • Open­ings for cables and tubes in the back panel
  • Slide-in mod­ules on the left (2 ver­sions) and right hand side
  • Com­pat­i­ble to the Zeiss Apo­Tome slid­er mod­ule and other components
  • Laser-safety: Both hinged doors, the two lamp sup­port seal­ings at the top and the incu­ba­tor case are equipped with con­tacts which switch off the laser; the black acrylic glass ensures pro­tec­tion against laser radi­a­tion with a wave­length up to 640 nm
  • Local gassing is pos­si­ble with spe­cif­ic Heat­ing Inserts and CO2-Covers in com­bi­na­tion with the CO2 Mod­ule and/or the O2 Module
  • Com­pat­i­ble to all condensers
  • Micro­ma­nip­u­la­tors of var­i­ous man­u­fac­tur­ers can be used

Specifications:

Material acrylic glass (PMMA), black
Valid temperature range 10°C – 50°C
Temperature sensor Pt100
Internal dimensions (WxHxD) 610 x 415 x 410 (mm)
Top hinged doors openings (LxW) 160 x 160 (mm)
Bottom sliding door openings (LxW) 115 x 90 (mm)
Weight approx 8.9 kg
Incubator XLmulti S DARK LS for Zeiss Axio Observer

Compatibility:

  • Axio Observer with object guide, mechanical stage or scanning stage and Zeiss ApoTome
  • Micromanipulators InjectMan, InjectMan NI2, TransferMan by Eppendorf
  • Micromanipulators by Narishige

Compatible PeCon Products:

Components additionally needed for gassing:

Application Examples: