Description:
- Large incubator for the inverted microscope Nikon Eclipse Ti with high volume for warm air incubation and CO2/O2 control
- Local CO2 and O2 gassing with the suitable components
- Black casing material for microscopic techniques in which scattered light is disturbing, e.g. fluorescence microscopy
- Large internal volume for the use of many different components
- For special applications (e.g. multiwell plates with glass bottoms) the Incubator NL Black 2000 can be operated with the Heating Unit alone
- Two large black sliding doors at the front of the incubator on the left and right hand side
- A smaller opening with two sliding doors that permit access to the objectives and filters
- Hatch on the bottom left hand side for additional access to the incubator interior
- Two slide-in base plates in the left and right hand side panels with openings for the object guide (silicone seal)
- Cables and tubing can be routed to the outside through two sliding doors at the rear side of the incubator; the lamp support can be swivelled back when the incubator is mounted
- The temperature sensor can be freely positioned inside the incubator to adapt to different setups
- Compatible to all condensers
- Easy and quick assembly
Specifications:
| Material | acrylic glass (PMMA), black |
| Valid temperature range | 10°C – 50°C |
| Temperature sensor | Pt100 |
| Internal dimensions (WxHxD) | 670 x 470 x 360 (mm) |
| Sliding doors openings, top left and right (WxH) | 160 x 160 (mm) |
| Sliding doors openings, bottom right (LxW) | 90 x 110 (mm) |
| Hatch opening, bottom left (LxW) | 125 x 110 (mm) |
| Sliding door opening, rear panel (LxW) | 101 x 155 (mm) |
| Sliding doors openings, left and right side panel (LxW) | 160 x 160 (mm) |
| Weight (incl. add-on components) | approx 8.5 kg |