Quality

Product

Electrical Units

TempController 2000-1

Temperature control unit with one channel to electrically heat various components of the manufacturer. The TempController 2000-1 is the base for further electrical units of the incubation system.

TempController 2000-2

Temperature control unit with 2 equal, independent channels to electrically heat various components of the manufacturer. The TempController 2000-2 is the base for further electrical units of the incubation system.

CO2– Controller 2000

The CO2-Controller 2000 is a control unit used for the pressure-less supply of small incubators on microscopes with a controlled CO2 air mixture via small gas feeding.

CO2– O2-Controller 2000

The CO2-O2-Controller 2000 is a control unit for the pressure-less supply of small incubators on microscopes with a controlled CO2/O2 air mixture via small gas feeding.

Heating Unit 2000

The Heating Unit 2000 supplies the large incubators of the manufacturer with heated air. The heater is designed to heat up the air in the large incubators up to max. 30°C above ambient temperature.

Control Sensor T 2000

The Control Sensor T 2000 is a small-sized control device for the measuring of temperature in different cell cultivation vessels, especially "35" and "60" Petri dishes. By means of this sensor, the actual temperature in the medium of the cell cultivation vessel can be measured in pre-experiments.

Control Sensor T 2000 sterilizable

The Control Sensor T 2000 sterilizable is a small-sized control device for measuring the temperature in "60" Petri dishes. By means of this sensor, the actual temperature in the medium of the cell cultivation vessel can be measured in pre-experiments. The whole sensor unit (glass cover, cable with LEMO® plug, Pt100-sensor) can be sterilized.

TempModule S
Zeiss exclusive

Temperature control unit with 4 equal, independent channels to electrically heat various components of the manufacturer. The TempModule S is the base for further modules of the incubation system and automatically supplies them with electrical power and communication signal via a system bus.

CO2 Module S
Zeiss exclusive

CO2 control device to achieve a stable, controlled increase of the CO2 concentration within incubators and CO2-Covers of the manufacturer. Further modules of the incubation system can be put on top of the CO2 Module S and are automatically supplied with electrical power and communication signal via a system bus.

O2 Module S
Zeiss exclusive

O2 control device to achieve a controlled decrease of the O2 concentration by displacement with N2 within special incubators of the manufacturer via two different incubations concepts.

Y-Module S
Zeiss exclusive

Y-Module S is designed for the connection of temperable devices with Pt100 sensor (e.g. Temperable Insert P S) to two Julabo F25-ME Refrigerated/Heating Thermostats with different bath temperatures to achieve a fast temperature change.

Heating Unit XL S
Zeiss exclusive

The Heating Unit XL S supplies the large Incubators XL S series and XL-3 S series with heated air. The heater is designed to heat up the air in the large incubators up to max. 30°C above ambient temperature.

In combination with the Heating Unit, the HEPA Sterile Filter almost eliminates the germinal contamination inside an incubator. HEPA Filter

Control Sensor T S
Zeiss exclusive

The Control Sensor T S is a small-sized control device for the measuring of the temperature in different cell cultivation vessels, especially "35" and "60" Petri dishes. By means of this sensor, the actual temperature in the medium of the cell cultivation vessel can be measured in pre-experiments.


© 2012 PeCon GmbH - All rights reserved.