Heating Unit XL S

Heating Unit XL S

The Heat­ing Unit XL S sup­plies the large Pecon incu­ba­tors with heat­ed air up to max. 30°C above ambi­ent temperature.

Description:

  • The Heat­ing Unit XL S sup­plies the large PeCon incu­ba­tors with heat­ed air up to max. 30°C above ambi­ent temperature
  • The Heat­ing Unit XL S auto­mat­i­cal­ly adapts to the impressed line voltage
  • High oper­a­tional safety:
    If the tem­per­a­ture of the inter­nal heat­ing block exceeds 170°C, the heater is per­ma­nent­ly deac­ti­vat­ed (ther­mal pro­tec­tion switch); after an excess tem­per­a­ture shut-off, the user can restart the device
  • The speed of the fan is per­ma­nent­ly monitored:
    If it falls below a thresh­old, the heater is switched off
  • New con­stant power system:The released heat­ing power is dynam­i­cal­ly adapt­ed to the cur­rent line volt­age; as a result, there is no over­heat­ing, a more sta­ble incu­ba­tor tem­per­a­ture and a high­er heat­ing power even with low line voltages
  • For the con­trol of air tem­per­a­ture, the Temp­Mod­ule S is required

 

Performance:

Typ­i­cal fast heat­ing of a large PeCon incu­ba­tor by the Heat­ing Unit XL S:

  1. Heat­ing up to 37.0°C with­in 30-45 min.
  2. Lev­el­ling with very low set­point devi­a­tion between 45 and 60min.
  3. Sta­ble oper­a­tion after 60-75min.


Long time sta­ble heat­ing of a large PeCon incu­ba­tor over sev­er­al days. Max­i­mum air tem­per­a­ture devi­a­tion: +/- 0.1°C.

Specifications:

AC operating voltage AC 100...115/230 V - autorange; 50 - 60 Hz
Power consumption 615 VA max.
Operating voltage (from TempModule S) DC 24 V
Power consuption (from TempModule S) 250 mA max.
Mains fuse 250 V 5.0 AT(H)
Max. heating power typ. 22-25°C above ambient temperature; dependent on the incubator type and the tube length
Thermal protection switch Switching temperature: > 170°C Resetting temperature: < 80°C
Dimensions (WxHxD) 206 x 154 x 210 mm
Weight approx. 3.7 kg
Operating temperature + 5°C up to + 40°C
Rel. humidity max. 80 %, non-condensing
Altitude max. 2000 m above sea level
Overvoltage category 2
Pollution degree 2
Protection class I
 
Heating Unit XL S

Requirements:

Compatibility:

  • all devices of the Zeiss Series S (and the PeCon Series 2000)

Application Examples: