Print This Page Print This Page

    Cooling/Heating Insert P Lab-Tek™ S

    Temperable Insert P Lab-Tek™ S


  • Solid cooling and heating element made of one piece of aluminium with uniform heat distribution and a high thermal conductivity. Best solution for the work with high magnification, precise positioning, LSM applications and live cell imaging. Specimens are firmly seated in the Cooling/Heating Insert P Lab-Tek S.
  • A rectangular observation opening (48,9 x 25,5 mm) ensures both access to the objectives and maximum heat transfer.
  • For perfusion applications, the tubes can be routed through the lateral openings or inserted into the channels for a preheating of the perfusion media. The lateral openings are closed with Allen screws and the channels with sliders so that the incubation chamber is sealed.
  • Recommended for electrophysiological experiments because no disturbing switching pulses are emitted.
  • Especially for the use with Lab-Tek chambers (adapter supplied), chamber slides and microscope slides.
  • The insert can be levelled in the stage by 4 screws.
  • The supplied red insert is used to close the observation opening when no cultivation vessel is inserted to maintain environmental conditions during incubation.
  • The tubes (1 m and 2 m) can be connected with self sealing couplings. The temperature range depends on the circulating water or other liquids and is regulated at the circulator.
  • Please also check the Cooling/Heating Insert P S.


    • Heating-Cooling Circulator (e.g. Lauda RE 106)


    • Zeiss Axio Observer with mechanical stage or scanning stage
    • Incubator PM 2000 RBT (Heating only)

    Cell cultivation vessels

    • Lab-Tek™ (Nunc®) and chambered slides (BD Falcon™)
    • Microscope slides

    Application Examples