Archive for 2011

Perfusion-Set for 60mm Petri dish by BD/Falcon

Tuesday, September 27th, 2011

The Perfusion-Set consists of a perfusion ring and a cover with glass insert and is especially designed to fit on the 60mm Petri dish by BD/Falcon with cover glass bottom. The Perfusion-Set is suitable for short- and long-term cultivation and observation of cell and tissue cultures. read more

Posted in News | Comments Off on Perfusion-Set for 60mm Petri dish by BD/Falcon


CO2-Cover KP Perfusion

Friday, July 15th, 2011

The CO2-Cover KP Perfusion is designed to fit onto the Universal Mounting Frame KP-Set and permits local CO2-control in a completely closed environment inside the large, heated incubators of the manufacturer. Especially for perfusion experiments (e.g. with Ibidi ยต-slides) there are 14 openings for the routing of tubes. read more

Posted in News | Comments Off on CO2-Cover KP Perfusion


CO2-Cover Micromanipulation KP-2

Wednesday, July 6th, 2011

The CO2-Cover Micromanipulation KP-2 is designed to fit onto Universal Mounting Frame KP-Set and permits local CO2-incubation of cell cultivation systems during micromanipulation inside the large, heated incubators of the manufacturer. Because of its flat design and the movable glass stripes the CO2-Cover permits an easy access for micromanipulators with a minimum of CO2-loss. read more

Posted in News | Comments Off on CO2-Cover Micromanipulation KP-2


Incubator OL IX71/81 BLACK cell^TIRF

Tuesday, July 5th, 2011

Large incubator with high volume for warm air incubation and CO2-control. The large internal volume allows the use of many different components. A local CO2-incubation is possible with the CO2-Controller and specific CO2-Covers. Due to the black casing material, the incubator is suitable for fluorescence applications. Compatible to the cell^TIRF Microscope Illuminator. read more

Posted in News | Comments Off on Incubator OL IX71/81 BLACK cell^TIRF


Cooling/Heating Incubation Insert P-Set 2000

Tuesday, July 5th, 2011

The Cooling/Heating Incubation Insert P-Set 2000 is designed for the stable heating and cooling of cell cultivation systems. It is made of aluminium with a uniform heat distribution and a high thermal conductivity and is equipped as standard with a temperature-controlled and slidable CO2-Cover. Four exchangeable baseplates enable the use of a large number of cell cultivation systems.
read more

Posted in News | Comments Off on Cooling/Heating Incubation Insert P-Set 2000


CO2-Cover UP-Set (for upright microscopes)

Thursday, April 14th, 2011

The CO2-Cover is designed to fit onto the Temperable Insert UP-Set. It permits local CO2-control in a completely closed environment inside the large, heated incubators of the manufacturer and provides for a homogeneous CO2-distribution across the slides. read more

Posted in News | Comments Off on CO2-Cover UP-Set (for upright microscopes)


Cooling/Heating Insert UP-Set 2000

Thursday, April 14th, 2011

The Cooling/Heating Insert UP-Set S is designed for the stable heating and cooling of cell cultivation systems. The temperature control takes place without disturbing switching pulses based on a closed circuit with water or other liquids. The insert is made of aluminium with uniform heat distribution and a high thermal conductivity. Exchangeable baseplates enable the use of different sizes of petri dishes and POC-Systems. The Cooling/Heating Insert UP-Set S is suitable for scanning and mechanical stages with a cut-out of 160 x 116 mm on upright microscopes. read more

Posted in News | Comments Off on Cooling/Heating Insert UP-Set 2000


CO2-Cover for Slide Holder fourfold

Wednesday, April 13th, 2011

The CO2-Cover is designed to fit onto the Slide Holder fourfold. It permits local CO2-control in a completely closed environment inside the large, heated incubators of the manufacturer and provides for a homogeneous CO2-distribution across the slides. read more

Posted in News | Comments Off on CO2-Cover for Slide Holder fourfold


Slide Holder fourfold (for CO2 gassing)

Wednesday, April 13th, 2011

The Slide Holder fourfold is designed for CO2 gassing of up to 4 slides. The Slide Holder has been especially constructed for chambered slides (besides standard slides) because it provides for a horizontal handling of the slides when they are filled with liquid. read more

Posted in News | Comments Off on Slide Holder fourfold (for CO2 gassing)


Incubator XL-3multi S

Thursday, February 17th, 2011

Large incubator for Axiovert 200 with high volume for warm air incubation and CO2-control. Local CO2-incubation can be carried out with the CO2 Module S in combination with appropriate CO2-Covers. The large internal volume allows the use of many different components. Compatible to the Zeiss ApoTome slider module and other components. read more

Posted in News | Comments Off on Incubator XL-3multi S